Thin Wall Mould Taizhou
Posted: Tue Aug 07, 2018 1:51 pm
· High Speed IML Container Mould is one kind of packaging mould, the product thickness is from 0.35mm to 0.6mm with 1 cavity or 2 cavity or 4 cavity or 8 cavity or more cavity. The mould should be strong and very good cooling system, With high speed injection machine and robot, the cycle time is about 6-7s for 4 cavity of 1L thin wall container mould. ENA Mould have more experience in IML container mould, every year we made about 150 sets of thin wall container mould, With high precision processing and test by our high speed injection machine. Anytime you are warmly welcome to visit our company to check thin wall mould.
Mould Base: C45, S50, P20
Core & Cavity: H13 + BeCu
Cavity Number: 1 cavity and 2 cavities
Injection Method: Hot Runner
Cycle Time: 5sec.
Mould Standard: LKM / DME / Hasco
Material: PP High MFI
Mold Life: More than 1 million
T1: 45 days
Packing: Standard Wooden Box
Mould Feature
1. Each cavity is self-locked, which is good for even thickness on every side.
2. Independent cooling system on each cavity and core, shortening production cycle time to 5 seconds.
3. Rational mould design to extend mold life and get high production efficiency.
4. Mirror hand polishing to create added-value.
5. H13 steel is applied, which has around 1 million shots life and smooth shiny surface.
6. High polish and mirror polish mould surface to ensure the plastic shiny surface.
7. Full automatic, high efficiency and less maintenance cost.
8. 3D drawing for free according to your samples.
9. The wall thickness can be 0.35mm.
10. Rich experience in thin wall mould to ensure mould to work fast, steady and efficient.Thin Wall Mould Taizhou
website:http://www.enamold.com/thin-wall-mould/
Mould Base: C45, S50, P20
Core & Cavity: H13 + BeCu
Cavity Number: 1 cavity and 2 cavities
Injection Method: Hot Runner
Cycle Time: 5sec.
Mould Standard: LKM / DME / Hasco
Material: PP High MFI
Mold Life: More than 1 million
T1: 45 days
Packing: Standard Wooden Box
Mould Feature
1. Each cavity is self-locked, which is good for even thickness on every side.
2. Independent cooling system on each cavity and core, shortening production cycle time to 5 seconds.
3. Rational mould design to extend mold life and get high production efficiency.
4. Mirror hand polishing to create added-value.
5. H13 steel is applied, which has around 1 million shots life and smooth shiny surface.
6. High polish and mirror polish mould surface to ensure the plastic shiny surface.
7. Full automatic, high efficiency and less maintenance cost.
8. 3D drawing for free according to your samples.
9. The wall thickness can be 0.35mm.
10. Rich experience in thin wall mould to ensure mould to work fast, steady and efficient.Thin Wall Mould Taizhou
website:http://www.enamold.com/thin-wall-mould/